Return to search

Water Quality Factors Influencing Iron and Lead Corrosion in Drinking Water

Corrosion is one of the most complicated and costly problems facing drinking water utilities. Corrosion of iron pipes can lead to economic losses and customer complaints, while lead corrosion poses a serious health risk.

This work first synthesizes nearly 100 years of iron corrosion research to provide the water industry with an updated understanding of factors that influence iron pipe corrosion including water quality and composition, flow conditions, biological activity, and corrosion inhibitors. Potential impacts of upcoming regulations on iron corrosion are also considered. Next, a four-year study is presented that evaluated the effect of water quality and phosphate inhibitors on the corrosion of iron pipes under extended stagnant water conditions. Surprisingly, many of the water quality parameters traditionally thought to influence iron corrosion were not controlling under these "worst case" stagnant conditions. Moreover, addition of phosphate inhibitors often had either no statistically significant effect or actually increased iron concentration, scale build-up and overall weight loss.

Temperature is often overlooked when corrosion of distribution systems pipes is considered. Temperature impacts many parameters that are critical to pipe corrosion including physical properties of the solution, thermodynamic and physical properties of corrosion scale, chemical rates, and biological activity. Moreover, variations in temperature and temperature gradients may give rise to new corrosion phenomena worthy of consideration by water treatment personnel. In laboratory experiments, cast iron samples at 5°C had 23% more weight loss, ten times higher iron release to water, and twice as much tuberculation compared to samples at 25°C.

For lead corrosion, hexametaphosphate inhibitors were proven to increase release of both particulate and soluble lead to drinking water by 200 - 3500% over a wide range of water qualities when compared to orthophosphate, effectively ending a long term debate as to their impacts. Utilities should consider these adverse effects whenever polyphosphate is used to prevent scaling or iron precipitation. / Ph. D.

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/28242
Date12 July 2000
CreatorsMcNeill, Laurie S.
ContributorsCivil Engineering, Edwards, Marc A., Novak, John T., Knocke, William R., Dietrich, Andrea M., Long, Gary L.
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
Detected LanguageEnglish
TypeDissertation
Formatapplication/pdf, application/pdf, application/pdf, application/pdf, application/pdf, application/pdf, application/pdf, application/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/
Relationch2.pdf, McNeillvita.pdf, appA.pdf, ch1.pdf, frontmatter.pdf, ch5.pdf, ch4.pdf, ch3.pdf

Page generated in 0.0023 seconds