D.Ing. / Low system efficiency is a critical problem in photovoltaic (PV) applications due to low efficiency of solar cells. Despite this shortcoming, stand-alone PV systems, have proven to be economical and reliable choices in some applications such as telecommunications, vaccine refrigeration and water pumping in remote locations. In this study, CAD algorithms for the design of PV water pumping systems have been developed with the objective of maximizing the conversion efficiency from the solar irradiation to the potential energy of water by taking into account the variations in the pumping head. The study starts by developing loss models of various sub-systems in the photovoltaic dc and ac motor drive water pumping systems. Using MathCad, these models are then used in the simulation of the system. The simulation results are verified experimentally using their equivalent circuit configurations. The efficiency of the array, the pump and the motor are found to be the most critical parameters for the performance of the systems. The efficiencies of other components, such as the inverter, have also been shown to have a significant effect. The study has shown that for operation at the maximum power point, the inclusion of a maximum power tracker is necessary in a dc motor drive system but may be eliminated in PWM inverter-fed induction motor drive systems through proper matching of the system components. The study has further shown that matching of the drive system and the load with the insolation is essential, since maximum system efficiency occurs at a specific head, which varies as the insolation changes. Prior investigation of site insolation variations is therefore a critical requirement.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uj/uj:3116 |
| Date | 23 August 2012 |
| Creators | Lujara, Nelson Kakuru |
| Source Sets | South African National ETD Portal |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0017 seconds