Return to search

High-concentration erbium-doped glasses, fiber amplifiers and lasers

Upconversion coefficients in a new high-concentration erbium-doped tellurite glass were obtained a schematic study of experiments and modeling. The upconversion coefficient for ⁴I₁₃/₂ + ⁴I₁₃/₂ → ⁴I₉/₂ + ⁴I₁₅/₂ is found to be 2.74 x 10⁻¹⁸ cm³/s and for ⁴I₁₁/₂ + ⁴I₁₁/₂ → ⁴I₁₅/₂ + ²F₇/₂ is 1.09 x 10⁻¹⁸ cm³/s. The performance of high concentration Er³⁺+-Yb³⁺ -codoped phosphate fiber amplifiers and the performance of a high-power Er³⁺-Yb³⁺-codoped phosphate fiber laser were presented. From a 3.6cm-long fiber, 18 dB internal gain i.e. 5 dB/cm, for small signal input at 1535 nm, was achieved. With a cleaved facet as the output mirror, a fiber laser has been demonstrated from the same fiber with an output power of 33.8 mW at 1549.92 nm. A high slope efficiency of 40.2% was observed. Modeling results of gain and noise figure of four phosphate EDFAs with different lengths were presented with previous measured results. 34% erbium ions were found to be paired in our 3.5wt% erbium-doped phosphate fiber amplifiers. The onset of erbium concentration for pair induced quenching is suggested to be around 3wt% in phosphate fiber amplifiers.

Identiferoai:union.ndltd.org:arizona.edu/oai:arizona.openrepository.com:10150/279804
Date January 2001
CreatorsHu, Yongdan
ContributorsPeyghambarian, Nasser
PublisherThe University of Arizona.
Source SetsUniversity of Arizona
Languageen_US
Detected LanguageEnglish
Typetext, Dissertation-Reproduction (electronic)
RightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.

Page generated in 0.0023 seconds