Electrochemically-induced changes in surface stress at the solid-liquid interface are measured using a differential cantilever-based sensor. The simultaneous, in situ measurements of the current (charge) and interfacial stress changes are performed by employing an AFM cantilever as both the working electrode (in a conventional three-probe electrochemical cell configuration) and as the mechanical transducer (bending of the cantilever). The custom-built instrument achieves a surface stress sensitivity of 1x10-4 N/m and a dynamic range of 5x105. Combining electrochemistry with cantilever-based sensing provides the extra surface characterization capability essential for the interpretation of the origin of the surface stress. / The objective of the present study is to gain a better understanding of the mechanisms responsible for the nanomechanical motion of cantilever sensors during adsorption and absorption processes. The study of these simple model systems will lead to a general understanding of the cantilever-based sensor's response and provide insights into the physical origin of the measured surface stress. / The surface stress generated by the electrochemically-controlled absorption of ions into a thin polypyrrole film is investigated. A compressive change in surface stress of about -2 N/m is measured when the polymer is electrochemically switched between its oxidized and neutral (swollen) state. The volume change of the polymer phase with respect to the gold-coated cantilever is shown to be responsible for the mechanical motion observed. / The potential-induced surface stress and surface energy change on an Au(111)-textured cantilever, in a 0.1 M HClO4 electrolyte, are simultaneously measured. These measurements revealed that for solid electrodes these two thermodynamic parameters are significantly different. In the double layer region, a surface stress change of -0.55 +/-0.06 N/m is measured during ClO4- adsorption whereas the surface energy variation is smaller by one order of magnitude. The origin of the surface stress change at the metal-electrolyte interface is understood by the variation in electron density at the surface which alters the inter-atomic bonds strength between surface atoms, while the specificity of adsorption of ions is found to be mostly responsible for the fine structure of the surface stress profile.
Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.102214 |
Date | January 2005 |
Creators | Tabard-Cossa, Vincent. |
Publisher | McGill University |
Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
Language | English |
Detected Language | English |
Type | Electronic Thesis or Dissertation |
Format | application/pdf |
Coverage | Doctor of Philosophy (Department of Physics.) |
Rights | © Vincent Tabard-Cossa, 2005 |
Relation | alephsysno: 002480083, proquestno: AAINR25264, Theses scanned by UMI/ProQuest. |
Page generated in 0.002 seconds