This thesis outlines the development of a new method for friction force measurements using atomic force microscopy. It is compared to the standard friction force microscopy technique for verification. This new method is used to investigate the friction properties in the boundary lubrication regime of a novel polymer brush sample with a very high grafting density. It is found that there is no correlation between friction coefficient and the surrounding fluid's pH or salt concentration, and that the coefficient of friction is on the order of 0.1. / La présente thèse aborde le développement d'une nouvelle méthode pour les mesures de friction à l'aide d'un microscope à force atomique. Elle est comparée à la méthode standard pour vérification. Cette nouvelle méthode est utilisée afin d'investiguer les propriétés dans le régime de la limite de lubrification d'un nouvel échantillon de brosse de polymères à très haute densité. Aucune corrélation n'a été trouvé entre le coefficient de friction et le pH ou la concentration de sel du fluide environnant. Le coefficient de friction mesuré est de l'ordre de 0.1.
Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.123065 |
Date | January 2014 |
Creators | Rigby, Matthew |
Contributors | Peter H Grutter (Internal/Supervisor) |
Publisher | McGill University |
Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
Language | English |
Detected Language | French |
Type | Electronic Thesis or Dissertation |
Format | application/pdf |
Coverage | Master of Science (Department of Physics) |
Rights | All items in eScholarship@McGill are protected by copyright with all rights reserved unless otherwise indicated. |
Relation | Electronically submitted theses |
Page generated in 0.3911 seconds