The diploma thesis deals with a design of a tester device, a selection and verification of a suitable method for comparing the piezoelectric properties of tested PVDF samples. In the introduction, a basic overview of the theory is important to understand the issue and the various branches of use of PVDF in the field of energy harvesting. The tester device includes a unimorph piezoelectric cantilever beam with tip mass, whose properties are described by three models: a model with N degrees of freedom reduced to one degree of freedom (NDOF), a single degree of freedom model (SDOF), both created in Matlab and a model for verifying results in FEM ANSYS Workbench program. The voltage time response and the voltage frequency response of the models is compared with each other. For two different PVDF samples, the voltage response to harmonic excitation is measured using a tester device, and the piezoelectric properties of one of them are determined using the NDOF and SDOF models.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:417737 |
| Date | January 2020 |
| Creators | Sijková, Simona |
| Contributors | Rubeš, Ondřej, Hadaš, Zdeněk |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Slovak |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds