Return to search

Predicting axially and laterally loaded pile behaviour using in-situ testing methods

The prediction of axial and lateral pile behaviour is a complex engineering problem. Traditional methods of data collection and subsequent analyses are frequently in error when compared to full-scale, load tests. In-situ testing, using advanced electronic tools, provides a means by which representative field data may be obtained. This study investigates the use of such in-situ data in predicting axially loaded pile capacity and laterally
loaded pile load-deflection behaviour.
A total of twelve static axial pile capacity methods were evaluated to predict the results obtained from eight full-scale pile load tests on six different piles. These methods, separated into direct and indirect classes, used data obtained from the cone penetration test. Extensive use of commercially available microcomputer software significantly simplified the analyses. In addition, several dynamic pile capacity predictions are presented including results from in-situ dynamic measurements obtained with a pile driving analyzer during pile emplacement. An attempt has been made, with the use of tell-tales, to differentiate the shaft resistance and end-bearing components of the load test results. These results are then compared to the prediction methods investigated.
Two methods of predicting lateral load-deflection behaviour using in-situ data have been investigated. One method uses pressuremeter test data and the other, a new method proposed in this study, uses full-displacement flat plate dilatometer test data. These predictions are compared with full-scale lateral load tests on three piles of differing size. In both the axial and lateral load cases, the preferred method(s) of analyses are identified. It is shown that excellent agreement can be obtained for predicting measured pile behaviour using several methods. The limitations of this study are noted, and recommendations for further research are proposed. / Applied Science, Faculty of / Civil Engineering, Department of / Graduate

Identiferoai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/26689
Date January 1987
CreatorsDavies, Michael Paul
PublisherUniversity of British Columbia
Source SetsUniversity of British Columbia
LanguageEnglish
Detected LanguageEnglish
TypeText, Thesis/Dissertation
RightsFor non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.

Page generated in 0.0019 seconds