This Paper deals with a design of tribometer for pin-on-disc and disc-on-disc tests. The purpose of these tests is Investigation of friction coefficient during hot forming. The main emphases of this paper are tool heating and quick tool change. The conductive sample heating is analyzed with FEM software Ansys and the results of this snalysis are taken into design consideration. Existing pin mounting design is considered as satisfying. Various disc mounting concepts are compared. The best solution - specimen mounting by an inside clamping cone with integrated specimen ejector was manufactured (heating excluding) and successfully tested.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231040 |
| Date | January 2013 |
| Creators | Růžička, Jakub |
| Contributors | Drossel, Welf-Guntram, Blecha, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds