Scheduling, placement, and routing are important steps in Very Large Scale Integration (VLSI) design. Researchers have developed numerous techniques to solve placement and routing problems. As the complexity of Application Specific Integrated Circuits (ASICs) increased over the past decades, so did the demand for improved place and route techniques. The primary objective of these place and route approaches has typically been wirelength minimization due to its impact on signal delay and design performance. With the advent of Field Programmable Gate Arrays (FPGAs), the same place and route techniques were applied to FPGA-based design. However, traditional place and route techniques may not work for Coarse-Grained Reconfigurable Architectures (CGRAs), which are reconfigurable devices offering wider path widths than FPGAs and more flexibility than ASICs, due to the differences in architecture and routing network. Further, the routing network of several types of CGRAs, including the Field Programmable Object Array (FPOA), has deterministic timing as compared to the routing fabric of most ASICs and FPGAs reported in the literature. This necessitates a fresh look at alternative approaches to place and route designs. This dissertation presents a finite domain constraint-based, delay-aware placement and routing methodology targeting an FPOA. The proposed methodology takes advantage of the deterministic routing network of CGRAs to perform a delay aware placement.
| Identifer | oai:union.ndltd.org:UTAHS/oai:digitalcommons.usu.edu:etd-1685 |
| Date | 01 May 2010 |
| Creators | Saraswat, Rohit |
| Publisher | DigitalCommons@USU |
| Source Sets | Utah State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | All Graduate Theses and Dissertations |
| Rights | Copyright for this work is held by the author. Transmission or reproduction of materials protected by copyright beyond that allowed by fair use requires the written permission of the copyright owners. Works not in the public domain cannot be commercially exploited without permission of the copyright owner. Responsibility for any use rests exclusively with the user. For more information contact Andrew Wesolek (andrew.wesolek@usu.edu). |
Page generated in 0.0022 seconds