Return to search

Analysis of voltage and current during the Plasma electrolytic Polishing of stainless steel

Plasma electrolytic Polishing (PeP) is a non-conventional technology for the surface treatment of electrically conductive materials. It is an effective machining technique for cleaning and polishing of metals and considered as a more environmentally friendly alternative to the electropolishing process. The electropolishing process uses aggressive media such as acids, whereas in PeP, acids or toxicants are replaced by low concentrated water solutions of various salts. In PeP, high DC voltage is applied to the electrodes in the aqueous electrolyte solution, which establishes a thin steam-gas layer around the surface of the work piece resulting in the generation of plasma.
From the previous research, it is found that the formation of stable plasma generally takes place between 180-370 volts, where it results in better surface conditions. The aim of this study is to analyse the behaviour of current according to different voltages and their effects on surface roughness and material removal rate (MRR) of stainless steel in Plasma electrolytic Polishing process.

Identiferoai:union.ndltd.org:DRESDEN/oai:qucosa.de:bsz:ch1-qucosa-227115
Date23 August 2017
CreatorsRajput, Ajeet Singh, Zeidler, Henning, Schubert, Andreas
ContributorsTechnische Universität Chemnitz, Fakultät für Maschinenbau
PublisherUniversitätsbibliothek Chemnitz
Source SetsHochschulschriftenserver (HSSS) der SLUB Dresden
LanguageEnglish
Detected LanguageEnglish
Typedoc-type:preprint
Formatapplication/pdf, text/plain, application/zip

Page generated in 0.0022 seconds