Return to search

BEHAVIOR OF UNSATURATED SOIL AND ITS INFLUENCE ON SOIL - SOIL INTERACTION AT AN INTERFACE.

The interface failure between caps and natural soil in trenches containing buried low level nuclear waste material was investigated in this study. The Casa Grande Highway Farm (CGHF) soil was used for the entire investigation. This soil is described as being a silty sand with approximately 23% by weight passing sieve No. 200. Other preliminary testing was performed on the same soil. Isotropically consolidated drained (CID) tests were performed on the laboratory compacted samples at different degree of saturation including fully saturated specimens. Suction pressure was measured in the laboratory by adopting pressure plate extractor and compared with determined effective suction in triaxial testing. A generalized failure equation, in term of strength parameters and suction pressure, was defined for all degrees of saturation. The consideration of unsaturated soil sets the current modified model apart from previous bounding surface which only allows use of fully saturated cohesive soil. The saturated material constants associated with the model are identified. These new constants are obtained from a generalized failure equation. The model was then verified by comparing predictions with other laboratory tests which are not used in the calibration. Generally a good agreement between the model and test results was found for stress-strain, stress path and volumetric strain response at different degrees of saturation. Extensive interface tests were performed in the conventional direct shear machine with some modification. Similar to trench cap soil and natural soil in the field, the test specimens were prepared at different degrees of saturation and density (compaction effort). Comparisons were made for the effects of magnitude of normal load, degree of saturation, density, compaction effort, moisture migration and dissimilar bodies density. An interface element and the modified bounding surface model and elasticity model was used in a finite element program to predict the interface response for the laboratory results and actual field problems. Material parameters related to the interface were identified and good predictions were observed for the interface behavior.

Identiferoai:union.ndltd.org:arizona.edu/oai:arizona.openrepository.com:10150/184224
Date January 1987
CreatorsTOUFIGH, MOHAMMAD MOHSEN.
ContributorsNowatzki, Edward A., Jimenez, R. A., Contractor, D. N., Kundu, T., Richard R. M.
PublisherThe University of Arizona.
Source SetsUniversity of Arizona
LanguageEnglish
Detected LanguageEnglish
Typetext, Dissertation-Reproduction (electronic)
RightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.

Page generated in 0.0019 seconds