In the American Institute of Steel Construction (AISC) LRFD specification, the shear lag coefficient for plate members is dependent on only the ratio of the welding length to the plate width. To determine how this ratio influences the shear lag coefficient and whether there are other factors that should be considered, a finite element investigation was conducted. Experimental data from a previous study conducted at Virginia Tech was used for comparison with the analytical model.
Upon completion of the verification study, several parameters were investigated to determine their influence on the shear lag coefficient. These included the effects of weld length, eccentric load and imperfection created by the welding process. Shear lag coefficients were determined from the finite element analyses and compared with the AISC specification values. / Master of Science
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/41534 |
Date | 12 March 2009 |
Creators | Wang, Yun Ping |
Contributors | Civil Engineering |
Publisher | Virginia Tech |
Source Sets | Virginia Tech Theses and Dissertation |
Language | English |
Detected Language | English |
Type | Thesis, Text |
Format | x, 88 leaves, BTD, application/pdf, application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Relation | OCLC# 26819971, LD5655.V855_1992.W362.pdf |
Page generated in 0.0015 seconds