There are approximately 20 000 small dams in the Czech Republic. This number entails many ponds or small flood attenuation reservoirs, which provide protection against floods. We do not know much about the structure and material properties of these earth dikes. Concerning the small dam stability the current technical standard ČSN 75 2410 focuses foremost on the angle of both the upstream and downstream slopes in case of different materials, and the method of the stability assessment in case of a dam height being 6m or more. Most of these earth dikes are still standing in spite not being built according to any technical standards. They do not follow any standards mostly because they were built before the modern technical standards were published. This diploma thesis focuses on assigning the degree of a reserve in the safety factor for studies of 5 homogeneous earth dikes and 3 inhomogeneous earth dikes. The calculation was done using the Plaxis 2D software using to the shear strength reduction method. The Calculation of the safety degree is made for 4 typical load cases.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:265266 |
| Date | January 2017 |
| Creators | Hajda, Jindřich |
| Contributors | Hodák,, Jiří, Říha, Jaromír |
| Publisher | Vysoké učení technické v Brně. Fakulta stavební |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0026 seconds