The goal of the present dissertation is to develop and apply novel and systematic data-driven optimization approaches that can efficiently optimize Additive Manufacturing (AM) systems with respect to targeted properties of final parts. The proposed approaches are capable of achieving sets of process parameters that result in the satisfactory level of part quality in an accelerated manner. First, an Accelerated Process Optimization (APO) methodology is developed to optimize an individual scalar property of parts. The APO leverages data from similar—but non-identical—prior studies to accelerate sequential experimentation for optimizing the AM system in the current study. Using Bayesian updating, the APO characterizes and updates the difference between prior and current experimental studies. The APO accounts for the differences in experimental conditions and utilizes prior data to facilitate the optimization procedure in the current study. The efficiency and robustness of the APO is tested against an extensive simulation studies and a real-world case study for optimizing relative density of stainless steel parts fabricated by a Selective Laser Melting (SLM) system. Then, we extend the idea behind the APO in order to handle multi-objective process optimization problems in which some of the characteristics of the AMabricated parts are uncorrelated. The proposed Multi-objective Process Optimization (m-APO) breaks down the master multi-objective optimization problem into a series of convex combinations of single-objective sub-problems. The m-APO maps and scales experimental data from previous sub-problems to guide remaining sub-problems that improve the solutions while reducing the number of experiments required. The robustness and efficiency of the m-APO is verified by conducting a series of challenging simulation studies and a real-world case study to minimize geometric inaccuracy of parts fabricated by a Fused Filament Fabrication () system. At the end, we apply the proposed m-APO to maximize the mechanical properties of AMabricated parts that show conflicting behavior in the optimal window, namely relative density and elongation-toailure. Numerical studies show that the m-APO can achieve the best trade-off among conflicting mechanical properties while significantly reducing the number of experimental runs compared with existing methods.
| Identifer | oai:union.ndltd.org:MSSTATE/oai:scholarsjunction.msstate.edu:td-2253 |
| Date | 04 May 2018 |
| Creators | Aboutaleb, Amirmassoud |
| Publisher | Scholars Junction |
| Source Sets | Mississippi State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Theses and Dissertations |
Page generated in 0.0023 seconds