Return to search

MESH-FREE MODELING OF ULTRASONIC FIELDS GENERATED BY TRANSDUCERS AND ACOUSTIC MICROSCOPES

With the gain in momentum of the structural health monitoring field in the last two decades, the popularity of ultrasonic nondestructive testing (NDT) has grown. However, ultrasonic NDT requires an expert to perform the testing and can be time consuming and costly when measured wave patterns in testing become extremely complex. A computer simulation of these tests can be utilized as a guide during actual evaluations or as a tool to train technicians. Presented in this dissertation is the development of models which simulate such acoustic phenomena as may arise in NDT. These models were developed using the distributed point source method (DPSM) for its proven capability to represent ultrasonic fields.Four sets of boundary conditions that arise from different types of commonly used acoustic transducers are modeled, enabling the visualization of the ultrasonic fields produced by the transducers. The transducer models exhibit good agreement with existing analytical solutions.In addition, the effect of a small cavity located at or near the focal point of an acoustic microscope is discussed. For this application the DPSM technique is modified so that inversion of a large global matrix is avoided, significantly improving the computational efficiency. The model shows that, as the pressure goes to zero, the velocity increases at the location of a cavity. Simulations demonstrate that the microscope is able to sense changes in position of the cavity by variations in the measured ratio of reflected to incident acoustic force.The field generated by an interferometric acoustic microscope is also presented. Qualitative agreement between the DPSM model and the experimental results of fields generated in a homogeneous fluid are obtained for a three-element lens. In the presence of a solid interface, the pressure on the edges of a converging beam near the fluid-solid interface is greater for a three-element lens than for single-element lens. A multi-element lens is also shown to exhibit oscillations in the pressure slightly above the interface.

Identiferoai:union.ndltd.org:arizona.edu/oai:arizona.openrepository.com:10150/195234
Date January 2009
CreatorsYanagita, Tamaki
ContributorsKundu, Tribikram, Kundu, Tribikram, Nikravesh, Parviz, Missoum, Samy, Kamel, Hussein
PublisherThe University of Arizona.
Source SetsUniversity of Arizona
LanguageEnglish
Detected LanguageEnglish
Typetext, Electronic Dissertation
RightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.

Page generated in 0.0023 seconds