Thin-film solar cells are widely recognised to have the potential to compete with fossil fuels in the electricity market due to their low cost per peak Watt. The Thin-Film Group at the University of New South Wales (UNSW) is engaged in developing polycrystalline silicon (poly-Si) thin-film solar cells on glass using e-beam evaporation technology. We believe our solar cells have the potential of significantly lowering the manufacturing cost compared to conventional, PECVD-fabricated thin-film solar cells. After years of materials research, the focus of the Group??s work is now moving to the metallisation of evaporated solar cells. Minimising various kinds of losses is the main challenge of the cell metallisation procedure, within which the contact resistance is always a big issue. In this thesis, the contact resistance of aluminium contacts on poly-Si thin-film solar cells on glass is investigated. To the best of the author??s knowledge, this is the first ever contact resistance investigation of Al contacts on evaporated poly-Si material for photovoltaic applications. Various transmission line models (TLM) are employed to measure the contact resistance. An improved TLM model is developed to increase the measurement precision and, simultaneously, to simplify the TLM pattern fabrication process. In order to accommodate the particular requirements of poly-Si coated glass substrates, a TLM pattern fabrication process using photolithography is established. Furthermore, a Kelvin sense tester is set up to ensure an accurate measurement of the contact resistance. After establishment of the TLM technique at UNSW, it is successfully tested on singlecrystalline silicon wafer samples. The thermal annealing process of the contacts is also optimised. Then, the general behaviour of Al contacts on uniformly doped poly-Si films (i.e., no p-n junction) is investigated using the verified TLM technique. The long-term stability of the contacts is also studied. This is followed by an investigation of the contact resistance of the back surface field and emitter layers of different types of poly-Si thin-film solar cells. Finally, a novel contact resistance measurement model is proposed that is believed to be able to overcome the measurement bottleneck of the transmission line models.
| Identifer | oai:union.ndltd.org:ADTP/257762 |
| Date | January 2008 |
| Creators | Shi, Lei, Photovoltaics & Renewable Energy Engineering, Faculty of Engineering, UNSW |
| Publisher | Publisher:University of New South Wales. Photovoltaics & Renewable Energy Engineering |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | http://unsworks.unsw.edu.au/copyright, http://unsworks.unsw.edu.au/copyright |
Page generated in 0.0016 seconds