Return to search

Fabrication of laterally stacked spin devices by semiconductor processing

This work presents a new approach of fabricating arrays of electrodes, separated by sub-micrometer gaps allowing the systematic investigation of electric properties of organic semiconductors. The laterally stacked devices are fabricated by using a trench isolation technique for separating different electrical potentials, as it is known for micromachining technologies like Single Crystal Reactive Ion Etching and Metallization (SCREAM). The essential part of this process is the patterning of sub-micrometer trenches onto the silicon substrate in a single lithographic step. Afterwards, the trenches are refilled by SiO2 to allow the precise tuning of the electrode separation gap. The metal electrodes are formed via magnetron sputtering. This technological approach allows us to fabricate device structures with a transport channel length in the range of 100-250 nm by conventional photolithography. In this experiment, three different metals like Au, Co, and Ni were used as the electrode materials, while copper phthalocyanine, being deposited by thermal evaporation in high vacuum, was employed as the organic semiconductor under evaluation. The final aim has been study of spin transport through the organic channel in varied geometry.

Identiferoai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:19750
Date04 December 2013
CreatorsGhosh, Joydeep
ContributorsGeßner, Thomas, Technische Universität Chemnitz
Source SetsHochschulschriftenserver (HSSS) der SLUB Dresden
LanguageEnglish
Detected LanguageEnglish
Typedoc-type:masterThesis, info:eu-repo/semantics/masterThesis, doc-type:Text
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.002 seconds