Polymeric materials are popular in civil infrastructure due to their durability, strength, and resistance to corrosion and environmental degradation. However, the long-term performance of such materials in civil infrastructure is still being researched and investigated. This thesis will focus on the long-term performance of two civil infrastructure applications: 1) high-density polyethylene (HDPE) above-ground storage tanks (AST) and 2) silicone and self-healing polymeric concrete sealants.
HDPE is a strong and durable plastic material that is commonly used to store a wide range of liquids ASTs. Currently, there are no established protocols for carrying out non-destructive testing (NDT) and assessment of HDPE ASTs for regular inspections, so this study investigated the viability of using infrared thermography (IRT) and ultrasonic testing (UT) for routine inspection. The study discovered that environmental parameters, such as temperature, wind, and humidity, can affect IRT accuracy, and that a proper heating-cooling cycle can aid in defect detection. Concrete joints in pavement systems are often susceptible to deterioration. They are engineered cracks that enable concrete slabs to expand and contract in response to temperature. They serve the dual purpose of preventing water infiltration and improving ride quality, while extending the pavement's service life. Bridge joints, in particular, are susceptible to water and liquid penetration, which can result in extensive damage over time. By applying sealants to these connections, concrete structures can be protected from such damage, thereby extending their service life. Consequently, a better comprehension of sealant performance and additional research are required to develop effective solutions to address these issues and ensure the safety and longevity of concrete structures prone to cracking. In this study, samples of the two commercial silicone joint sealants were sandwiched between Portland cement mortar specimens and tested using a specially designed fixture to imitate the fatigue performance of the joint under simulated field conditions. The results of the study indicated that the fatigue life of the two silicone sealants were different, with Sealant 2 showed better performance than Sealant 1. Both sealants exhibited adhesive failure initiating debonding along the weak interface of cement mortar cube and joint sealant. The results of commercial sealants are then compared with self-healing polysulfide sealants. This indicates that the performance of sealants can vary, and additional research may be required to develop effective solutions to address these issues. / Master of Science / Polymeric materials are widely utilized in construction due to their durability, strength, and resistance to corrosion and environmental degradation. However, the long-term performance of these materials in civil infrastructure is still under investigation. This thesis specifically examines the long-term performance of two civil infrastructure applications: 1) high-density polyethylene (HDPE) above-ground storage tanks (ASTs) and 2) silicone and self-healing polymeric concrete sealants.
HDPE is a robust and durable plastic material commonly employed for storing various liquids in ASTs. Currently, there are no established protocols for conducting non-destructive testing (NDT) and assessment of HDPE ASTs during regular inspections. Therefore, this study investigates the viability of utilizing infrared thermography (IRT) and ultrasonic testing (UT) for routine inspections. The findings reveal that environmental factors such as temperature, wind, and humidity can impact the accuracy of IRT, and implementing a proper heating-cooling cycle can help in detecting such defects inside the tank structure.
Concrete joints in pavement systems are susceptible to deterioration. These engineered cracks allow concrete slabs to expand and contract in response to temperature changes, while preventing water infiltration and enhancing ride quality, thus prolonging the pavement's service life. Bridge joints, in particular, are prone to water and liquid penetration, leading to extensive damage over time. Applying sealants to these connections safeguards concrete structures, extending their service life. Consequently, understanding sealant performance and conducting further research are crucial for developing effective solutions to address these issues and ensure the safety and durability of concrete structures prone to cracking.
This study involves testing two commercially available silicone joint sealants by sandwiching them between Portland cement mortar specimens. A specially designed fixture is employed to simulate the fatigue performance of joints under field-like conditions. The performance of commercial sealants was also compared with self-healing polysulfide sealants. These findings highlight the variability in sealant performance, emphasizing the need for additional research to develop effective solutions.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/115778 |
| Date | 14 July 2023 |
| Creators | Shaikh, Mohammad Shadab Sadique |
| Contributors | Civil and Environmental Engineering, Brand, Alexander S., Leon, Roberto T., Case, Scott W. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0024 seconds