ABSTRACT
A study is carried out on the production of aluminum foams via powder processing. The study deals mainly with the effect of TiH2 particle size on the process of foaming. Mainly two TiH2 particle sizes were used / namely 27,5 & / #61549 / m and 8,5 & / #61549 / m. Foaming experiments were carried out at temperatures between 675oC &ndash / 840oC. The viscosity of the system is adjusted by controlled addition of Al2O3. The study shows that choice of foaming agent size is influential in the foaming process. With the use of fine foaming agent, temperatures in excess of 800oC would be required for successful foaming. The study further showed that the relation between foaming and viscosity was also dependent on the particle size. Viscosity of 2.3 mPa.s was found to be a limiting value for successful foaming with fine foaming agent. This value appears to increase with increasing particle size. An analysis is presented with regard to temperature dependence of foaming which takes into account the effect of particle size.
| Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/2/12606897/index.pdf |
| Date | 01 December 2005 |
| Creators | Kubilay, Ceylan |
| Contributors | Ozturk, Tayfur |
| Publisher | METU |
| Source Sets | Middle East Technical Univ. |
| Language | English |
| Detected Language | English |
| Type | M.S. Thesis |
| Format | text/pdf |
| Rights | To liberate the content for METU campus |
Page generated in 0.0017 seconds