Indiana University-Purdue University Indianapolis (IUPUI) / Sintering is a primary particulate manufacturing technology to provide densification and strength for ceramics and many metals. A persistent problem in this manufacturing technology has been to maintain the quality of the manufactured parts. This can be attributed to the various sources of uncertainty present during the manufacturing process. In this work, a two-particle phase-field model has been analyzed which simulates microstructure evolution during the solid-state sintering process. The sources of uncertainty have been considered as the two input parameters surface diffusivity and inter-particle distance. The response quantity of interest (QOI) has been selected as the size of the neck region that develops between the two particles. Two different cases with equal and unequal sized particles were studied. It was observed that the neck size increased with increasing surface diffusivity and decreased with increasing inter-particle distance irrespective of particle size. Sensitivity analysis found that the inter-particle distance has more influence on variation in neck size than that of surface diffusivity. The machine-learning algorithm Gaussian Process Regression was used to create the surrogate model of the QOI. Bayesian Optimization method was used to find optimal values of the input parameters. For equal-sized particles, optimization using Probability of Improvement provided optimal values of surface diffusivity and inter-particle distance as 23.8268 and 40.0001, respectively. The Expected Improvement as an acquisition function gave optimal values 23.9874 and 40.7428, respectively. For unequal sized particles, optimal design values from Probability of Improvement were 23.9700 and 33.3005 for surface diffusivity and inter-particle distance, respectively, while those from Expected Improvement were 23.9893 and 33.9627. The optimization results from the two different acquisition functions seemed to be in good agreement with each other. The results also validated the fact that surface diffusivity should be higher and inter-particle distance should be lower for achieving larger neck size and better mechanical properties of the material.
| Identifer | oai:union.ndltd.org:IUPUI/oai:scholarworks.iupui.edu:1805/24755 |
| Date | 12 1900 |
| Creators | Batabyal, Arunabha |
| Contributors | Zhang, Jing, Yang, Shengfeng, Du, Xiaoping |
| Source Sets | Indiana University-Purdue University Indianapolis |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0015 seconds