Selecting a suitable power source, during the design process, for a stand-alone soya business unit is challenging and complex. Especially with the aim of optimizing electrical and thermal energy, as well as minimizing the life cycle cost. During the design and development of a soya business unit it was realized that a design tool is needed to assist with the decision making process when selecting a power source. Waste heat can be recovered from either or both the exhaust gas and cooling system of the power source and can be utilized in the soya process.
Research of available literature revealed no design tool to assist with the decision making process of the stand-alone business unit and consequently lead to this study. This dissertation presents different possible power sources that could be utilized in supplying energy to the business unit, as well as design tools available. Advantages and disadvantages of the different power sources are discussed. The shortfalls of a number of the available design tools are also discussed.
A diesel generator set was selected as the preferred power source for the business unit. Criteria for this selection included the price per kWhe generated, the ease of maintenance, the availability of the diesel generators in rural areas and the availability of diesel as a fuel. The diesel engine was characterized through experimental work for a more in depth understanding of the energy profile of the engine at part load conditions. These results were used as guidelines in the development of the design tool.
The design tool was developed with the aim of being user friendly and versatile. The time intervals of the required load of the business unit are flexible. Different types of power sources and fuels can be used within the design tool. User defined heat exchangers are utilized to calculate the possible heat recovery from the power source.
The design tool matches the available energy of different power sources at part load conditions with the required load profile of the soya business unit. It then eliminates power sources that would not be able to deliver the minimum required energy. The running cost is calculated for each of the remaining power sources and the power source with the minimum annualized cost, which includes capital cost, maintenance cost and fuel cost, is suggested.
The design tool was verified against a base load condition of the soya business unit and the suggested power source showed a saving of 31,4% in electrical energy, an increased overall efficiency of 24,9% and a saving in annualized cost of 27,3%. The design tool can be used to optimize specific components and design options within a combined heat and power system. Sensitivity analysis can be performed with the design tool to determine various influences on the designed system. / Thesis (M.Ing. (Mechanical Engineering))--North-West University, Potchefstroom Campus, 2008.
Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:nwu/oai:dspace.nwu.ac.za:10394/1943 |
Date | January 2007 |
Creators | Botes, Jan Adriaan |
Publisher | North-West University |
Source Sets | South African National ETD Portal |
Detected Language | English |
Type | Thesis |
Page generated in 7.4722 seconds