The doctoral thesis proposes a synchronization event detection method suitable for establishing a common time base across devices using power-line communication. The technique facilitates the creation of a synchronization procedure for smart grid terminal devices, thus bringing to the low-voltage segment new functionalities already known from the higher voltage levels of the distribution network. High-precision, zero-cross line voltage detection was employed as the synchronization event. The use of the PLL (phase-locked loop) was considered and analyzed as a potentially applicable option; however, such a solution proved to be insufficiently robust against interference. Further, an FFT-based approach was designed and reviewed. The technique performs zero-cross detection, but only for the fundamental harmonic component that remains the same across the entire network. The influence of incoherent sampling on the FFT, too, was tested during the development of the method; in this context, coherent sampling was found to constitute an essential prerequisite for accurate detection as it allows us to eliminate the spectral leakage error. The impact of an AD converter on the detection accuracy was also evaluated. The proposed approach ensures the accuracy required for all common measurements and operations to improve the production, distribution, and consumption of electricity through smart grids.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:371798 |
| Date | January 2018 |
| Creators | Šťastný, Ladislav |
| Contributors | Steinbauer, Miloslav, Vozňák, Miroslav, Fiedler, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Slovak |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds