The diploma thesis deals with the design of hybrid microphone preamplifier with stepless choice of amplification technology between active part using tube or semiconductor elements. Before the design, the basic physical relations of electroacoustics were described. Problems of connection of audio devices, their voltage and noise conditions. At last technical properties of microphones and tubes were described. In the practical part, the overall structure of the hybrid preamplifier is designed and the goals of the thesis are set. This is followed by a detailed design of the preamplifiers. From input circuits through individual amplifier stages of the semiconductor and tube sections to the output of the device. Much of the circuit was tested by software simulations. Based on the results obtained in the design of the signal part of the preamplifier, the power circuits were designed. Finaly the preamplifier functionality was verified by measurement on the Audio Analyzer.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:400858 |
| Date | January 2019 |
| Creators | Valach, Ondřej |
| Contributors | Hanák, Pavel, Koton, Jaroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0075 seconds