Stress relaxation measurements were carried out on a plain carbon and four Ti steels over the temperature range 850 to 1050$ sp circ$C. The results show that the stress relaxation of plain carbon austenite after a 5% prestrain can be described by the relation $ sigma$ = $ sigma sb0$-$ alpha$ln(1 + $ beta$t). By contrast, in the solution-treated Ti steels, relaxation is arrested at the start of precipitation and is resumed when precipitation is complete. As a result, this new mechanical method is suitable for following carbonitride precipitation in microalloyed austenite at hot working temperatures. / PTT diagrams were determined by the present technique for the steels containing 0.05, 0.11, 0.18 and 0.25% Ti. The PTT curves obtained are C shaped for all the steels. The upper parts of these curves are shifted to significantly longer times as the Ti and C concentrations are reduced. By contrast, the positions of the lower arms of the curves are relatively independent of the current values of the solubility product (Ti) (C). This phenomenon is attributed to the catalytic effect of trace amounts of dissolved N on the nucleation rate of Ti(CN) in austenite. / Changes in the size distribution and morphology of the precipitates during relaxation of the 0.25% Ti steel were followed by means of electron microscopy. The cube shaped Ti(CN) precipitates were heterogeneously distributed in either a chain-like or a cell-like manner. Electron microanalysis was additionally carried out to determine the compositions of the Ti carbosulphide-Mn sulphide inclusions. / Finally, the experimental results are compared with the predictions of classical nucleation theory and of the diffusion controlled particle growth theory. Good agreement was obtained between the predictions of the theories and the experimental results. It is demonstrated by means of the thermodynamic analysis of nucleation that the Ti(CN) precipitate/austenite interface is of a semi-coherent nature. It is shown that the interface between a critical nucleus and the matrix can be characterized by the newly introduced coherency loss parameter C.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.75434 |
| Date | January 1987 |
| Creators | Liu, Weijie. |
| Publisher | McGill University |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Format | application/pdf |
| Coverage | Doctor of Philosophy (Department of Mining and Metallurgical Engineering.) |
| Rights | All items in eScholarship@McGill are protected by copyright with all rights reserved unless otherwise indicated. |
| Relation | alephsysno: 000550440, proquestno: AAINL44309, Theses scanned by UMI/ProQuest. |
Page generated in 0.0128 seconds