<p dir="ltr">Piezoelectric polymers and ceramics have applications throughout many fields, including their use as pressure sensors and transducers. Of the polymers, poly(vinylidene fluoride – trifluoroethylene) (P(VDF-TrFE)), has been the go-to for its high piezoelectric performance. With the addition of aluminum nanopowders (nAl), P(VDF-TrFE) acts as a binder and oxidizer, creating an energetic composite, a so-called piezoenergetic. However, this typically results in lower d<sub>33</sub> coefficients and can have lower reactivity since ideal mixtures may short when poled. Here, we develop and demonstrate single-layer and multilayer polymer composite films with high piezoelectric and energetic content. We prepared single-layer thin film piezoelectric energetic composites of nAl and P(VDF-TrFE) and a combination of thermal annealing and poling at elevated temperatures enabled full poling of 9 wt.% nAl/P(VDF-TrFE) films with d<sub>33</sub> of 22.7 pC/N that is comparable to P(VDF-TrFE) films. We also investigated the addition of barium titanate (BaTiO<sub>3</sub>) particles as a piezoelectric ceramic to enhance the d<sub>33</sub> coefficient. In the neat polymer, BaTiO<sub>3</sub> had differing effects depending on the particle size, with 200 nm particles improving the d<sub>33</sub> coefficient more than the 1 μm particles. However, neither size of BaTiO<sub>3</sub> particle had a substantial effect on the piezoelectricity in the 9 wt.% nAl/P(VDF-TrFE) films. We also prepared hot-pressed, three-layer “sandwich” P(VDF-TrFE) – 30 wt.% nAl/P(VDF-TrFE) – P(VDF-TrFE) composites, which had marginally lower d<sub>33</sub> coefficients than the single-layer 9 wt.% nAl/P(VDF-TrFE) films. However, the 30 wt.% nAl/P(VDF-TrFE) sandwich films were far more energetic than the 9 wt.% nAl/P(VDF-TrFE) films, as confirmed by simultaneous differential scanning calorimetry and thermogravimetric analysis (DSC/TGA) and deflagration studies. The single films will often fail to fully sustain a deflagration, while the sandwich films burn completely. In addition, we can ignite the sandwich samples with an electrical discharge making these films also useful in ignition applications. To demonstrate the use of piezoenergetic films, 9 wt.% nAl/P(VDF-TrFE) single layer and 30 wt.% nAl/P(VDF-TrFE) sandwich films were calibrated as pressure gauges using a mini drop weight setup, and then demonstrated as a pressure gage. The improvements in the piezoelectric coefficient of the 9 wt.% nAl/P(VDF-TrFE) single layer films, as well as the energetic performance in the form of the 30 wt.% nAl/P(VDF-TrFE) sandwich films strongly amplify the existing potential of these multifunctional composites in energetic and pressure sensing applications.</p>
Identifer | oai:union.ndltd.org:purdue.edu/oai:figshare.com:article/24579838 |
Date | 17 November 2023 |
Creators | Cohen Thomas Ves Nunes (17405389) |
Source Sets | Purdue University |
Detected Language | English |
Type | Text, Thesis |
Rights | CC BY 4.0 |
Relation | https://figshare.com/articles/thesis/Methods_for_Improving_the_Piezoelectric_and_Energetic_Performance_of_nAl_P_VDF-TrFE_Composites/24579838 |
Page generated in 0.0022 seconds