The proposed work is dealing with control design of pump-tank system as part of broader water-supply network with using of mechatronic approach. The main goal of this work is design of control for regulation of flow, pressure and water level in tank in water-supply network of Vsetin city. This water-supply network consists of various components, such as pumps, pipes, valves, tanks etc. For the purpose of the control design is necessary to create a model of pipe network. The solution of hydraulic analysis is obtained by using the gradient method, which was implemented into the software solution named ADAM. The results of hydraulic analysis are compared with measured values of flow and pressure and difference of these values has to be minimalized by proposed calibration and verification process. The calibration and verification process was implemented in software ADAM. The essence of design control is formulating control problem as optimization problem. Therefore the output of higher control layer is set of procedural rules, which determines for example speed of pumps in time etc. Results were verified by using for this purpose developed computational server (ADAM Server).
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:234215 |
| Date | January 2014 |
| Creators | Kovář, Jiří |
| Contributors | Němec, Zdeněk, Svoboda,, Miroslav, Březina, Tomáš |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0024 seconds