Return to search

Automated radiographic inspection of through-hole electronic circuit board solder defects

A study has been carried out to investigate the use of "real-time" radiography as a method of automated inspection of through-hole electronic circuit board solder joints. By evaluating five major solder defects it has been found that film radiography employing high contrast film results in a definite distinction between a good solder joint and a defective solder joint. The same five defects were also found to be distinguishable from a good solder joint when evaluated by a real-time radiographic inspection unit using digital image processing. Although the type of defect being investigated was not discernible, the ability to distinguish a good solder joint from a defective solder joint is a major step in the implementation of automated solder joint inspection for military electronics.

Identiferoai:union.ndltd.org:arizona.edu/oai:arizona.openrepository.com:10150/276672
Date January 1988
CreatorsLeal, James Andrew, 1963-
ContributorsDemer, Louis J.
PublisherThe University of Arizona.
Source SetsUniversity of Arizona
Languageen_US
Detected LanguageEnglish
Typetext, Thesis-Reproduction (electronic)
RightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.

Page generated in 0.0021 seconds