Return to search

A Novel Design for Fully Printed Flexible AC-driven Powder Electroluminescent Devices on Paper

ACPEL devices were fabricated onto various paper substrates. The dielectric and phosphor layers were mask printed, a PEDOT:PSS/SWCNT ink was inkjet-printed for the cathode and a translucent conductor was applied with a paintbrush for the anode resulting in a maximum luminance of 8.05 cd/m2 at 300 VAC and 60 Hz. It was found that the conductivity of the PEDOT:PSS/SWCNT ink on the various paper types was affected by the coating and paper thickness. Novel ACPEL devices were also fabricated by incorporating paper as the dielectric layer of the device. The maximum luminance achieved was 7.24 cd/m2 at 300 VAC and 60 Hz. It is shown that the dielectric constant of the paper and hence the performance of the resulting EL device may be enhanced by filling the sheet with BaTiO3 and by the surface treatment of the sheet.

Identiferoai:union.ndltd.org:TORONTO/oai:tspace.library.utoronto.ca:1807/65567
Date26 June 2014
CreatorsKronfli, Rosanna
ContributorsRamin, Farnood
Source SetsUniversity of Toronto
Languageen_ca
Detected LanguageEnglish
TypeThesis

Page generated in 0.0017 seconds