We report on the detailed electrical investigation of all-inkjet-printed thin-film transistor (TFT) arrays focusing on TFT failures and their origins. The TFT arrays were manufactured on flexible polymer substrates in ambient condition without the need for cleanroom environment or inert atmosphere and at a maximum temperature of 150 °C. Alternative manufacturing processes for electronic devices such as inkjet printing suffer from lower accuracy compared to traditional microelectronic manufacturing methods. Furthermore, usually printing methods do not allow the manufacturing of electronic devices with high yield (high number of functional devices). In general, the manufacturing yield is much lower compared to the established conventional manufacturing methods based on lithography. Thus, the focus of this contribution is set on a comprehensive analysis of defective TFTs printed by inkjet technology. Based on root cause analysis, we present the defects by developing failure categories and discuss the reasons for the defects. This procedure identifies failure origins and allows the optimization of the manufacturing resulting finally to a yield improvement.
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:20569 |
| Date | 10 October 2016 |
| Creators | Sowade, Enrico, Ramon, Eloi, Mitra, Kalyan Yoti, Martínez-Domingo, Carme, Pedró, Marta, Pallarès, Jofre, Loffredo, Fausta, Villani, Fulvia, Gomes, Henrique L., Terés, Lluís, Baumann, Reinhard R. |
| Contributors | Technische Universität Chemnitz |
| Publisher | Nature Publishing Group |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | doc-type:article, info:eu-repo/semantics/article, doc-type:Text |
| Source | Scientific Reports 6, Article number: 33490 (2016) doi:10.1038/srep33490 |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | 10.1038/srep33490, 2045-2322 |
Page generated in 0.0021 seconds