The transformation of solar energy into electricity is starting to impact to overall worldwide energy production mix. Photovoltaic-generated electricity can play a significant role in minimizing the use of non-renewable energy sources. Sunlight consists of three main components: global horizontal irradiance (GHI), direct normal irradiance (DNI) and diffuse horizontal irradiance (DHI). Typically, these components are measured using specialized instruments in order to study solar radiation at any location. However, these measurements are not always available, especially in the case of the DNI and DHI components of sunlight. Consequently, many models have been developed to estimate these components from available GHI data. These models have their own merits. For this thesis, solar radiation data collected at four locations have been analyzed. The data come from Al-Hanakiyah (Saudi Arabia), Boulder (U.S.), Ma’an (Jordan), and Ottawa (Canada). The BRL, Reindl*, DISC, and Perez models have been used to estimate DNI and DHI data from the experimentally measured GHI data. The findings show that the Reindl* and Perez model outcomes offered similar accuracy of computing DNI and DHI values when comparing with detailed experimental data for Al-Hanakiyah and Ma’an. For Boulder, the Perez and BRL models have similar estimation abilities of DHI values and the DISC and Perez models are better estimators of DNI. The Reindl* model performs better when modeling DHI and DNI for Ottawa data. The BRL and DISC models show similar metrics error analyses, except in the case of the Ma’an location where the BRL model shows high error metrics values in terms of MAE, RMSE, and standard deviation (σ). The Boulder and Ottawa locations datasets were not complete and affected the outcomes with regards to the model performance metrics. Moreover, the metrics show very high, unreasonable values in terms of RMSE and σ. It is advised that a global model be developed by collecting data from many locations as a way to help minimize the error between the actual and modeled values since the current models have their own limitations. Availability of multi-year data, parameters such as albedo and aerosols, and one minute to hourly time steps data could help minimize the error between measured and modeled data. In addition to having accurate data, analysis of spectral data is important to evaluate their impact on solar technologies.
| Identifer | oai:union.ndltd.org:uottawa.ca/oai:ruor.uottawa.ca:10393/36499 |
| Date | January 2017 |
| Creators | Abyad, Emad |
| Contributors | Hinzer, Karin, Atieh, Ahmad Khader |
| Publisher | Université d'Ottawa / University of Ottawa |
| Source Sets | Université d’Ottawa |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0028 seconds