Estimating S-wave velocities (Vs) from Rayleigh-wave velocities (VR) is widely used in field seismic testing for geotechnical engineering purposes. In this research, two widely used surface-wave methods, the Spectral-Analysis-of-Surface-Waves (SASW) and Multichannel-Analysis-of-Surface-Waves (MASW) methods, are evaluated and compared in field experiments.
An experimental parametric study was undertaken of the SASW and MASW methods. Conventional seismic sources in the SASW method are sledge hammers, bulldozers and vibroseises. For MASW testing, sledge hammers and small shakers are usually used as the seismic sources. In this research, MASW testing was performed with traditional and non-traditional sources at a site owned by the City of Austin, Texas. Experimental dispersion curves and Vs profiles from SASW tests are used as references for the field parametric study with the MASW method. The source type, source offset, receiver spacing and number of receivers were varied to evaluate the impact of each variable on the field experimental dispersion curve. Two type of receivers, 1-Hz and 4.5-Hz natural-frequency geophones, were also compared in these tests.
A second part of this research involved studying the use of characterizing geotechnical materials based on Vs. This work included two projects. The first project involved basalt on the Big Island of Hawaii. To develop empirical ground motion prediction models for the purpose of earthquake hazard mitigation and seismic design on the Big Island, the subsurface site conditions beneath 22 strong motion stations were investigated by SASW tests. Vs profiling was performed to depths of more than 100 ft. Vs30, the average Vs in the top 30 m, was also calculated to assign NEHRP site classes to different testing locations. Different materials, mainly thought to be stiff basalt, were characterized and grouped based on the Vs values. These groups were then compared with reference curves for sand and gravel (Menq, 2003) to differentiate the groups.
The second project dealing with charactering geotechnical materials based on Vs involved of soil/rock profiles at a project site in British Columbia, Canada. The goals in terms of this research were to: (1) compare the Vs profiles from the different test locations to investigate the stiffnesses of different geologic materials, the variability in the material stiffnesses, and the estimated depth to bedrock, and (2) to compare the Vs profiles to existing geological and geotechnical information such as nearby boreholes, cone penetration tests and seismic cone penetration tests. Good agreement between SASW Vs profiles and boring records is expected when lateral variability at the site is low. However, when lateral variability is significant, then the difference between localized measurements, like borings and CPT results, and global measurements, like SASW Vs results, can further contribute to understanding the site conditions as shown at the site in British Columbia, Canada. / text
| Identifer | oai:union.ndltd.org:UTEXAS/oai:repositories.lib.utexas.edu:2152/ETD-UT-2011-08-3981 |
| Date | 13 October 2011 |
| Creators | Yuan, Jiabei |
| Source Sets | University of Texas |
| Language | English |
| Detected Language | English |
| Type | thesis |
| Format | application/pdf |
Page generated in 0.0019 seconds