Return to search

MÃtodo de seleÃÃo de faixa para estudo de traÃado para obras lineares de infraestrutura de transportes / Track selection procedure for mapping study for construction transport infrastructure of linear.

O estudo de traÃado para obras lineares apresenta-se como um tema de suma importÃncia nas fases de concepÃÃo e definiÃÃo das diretrizes a serem estudadas para elaboraÃÃo de projetos de infraestrutura de transportes.
A definiÃÃo do traÃado de uma via deve ser feita observando o resultado do estudo das alternativas de traÃado e a comparaÃÃo entre elas, matematicamente existem infinitas possibilidades de alternativas de traÃado entre pontos sucessivos o que dificulta a escolha de uma Ãnica soluÃÃo.
A dificuldade em se definir critÃrios e parÃmetros objetivos para determinaÃÃo de uma Ãrea de estudo e consequentemente a melhor alternativa de traÃado motivou o estudo apresentado.
As anÃlises de traÃado atuais se limitam a diretrizes prÃ-estabelecidas em um nÃmero reduzido, o que pode induzir a escolhas de traÃados que conduzam a custos mais elevados e Ãs condiÃÃes de operaÃÃo e manutenÃÃo indesejadas para a futura via.
PropÃe-se um mÃtodo de definiÃÃo da melhor faixa para estudo de traÃado para obras de infraestrutura de transporte tomando como base dados topogrÃficos, considerando custos de implantaÃÃo e de operaÃÃo.
O mÃtodo sugerido consiste na varredura tridimensional da regiÃo onde se insere a obra em estudo, apontando as melhores faixas para desenvolvimento do projeto baseando-se na topografia, considerando caracterÃsticas geomÃtricas do projeto, Ãreas de restriÃÃo, custos de implantaÃÃo e de operaÃÃo.
O mÃtodo de seleÃÃo proposto foi aplicado em uma variante ferroviÃria de oito quilÃmetros, onde foram analisadas 729 alternativas e definida a melhor faixa para o estudo de traÃado.
Os resultados foram comparados ao projeto executivo e feitas as mesmas consideraÃÃes utilizadas no projeto o que demonstraram a viabilidade da metodologia. / The study of horizontal alignment for linear works presented is an issue of paramount importance in the design and definition of the guidelines to be studied for the preparation of transport infrastructure projects.
Setting the tracing of a track must be made observing the result of the study of alignment alternatives and comparing them, mathematically there is infinite possibilities for alignment alternatives between successive points making it difficult to choose a single solution.
The difficulty in defining criteria and objective parameters for determining an area of study and therefore the best alternative route led the study presented.
The current trace analysis is limited to pre-set guidelines on a limited number, which can induce choices paths leading unwanted higher costs and operating and maintenance conditions for future route.
It is proposed a better range setting method for the study of horizontal alignment for transport infrastructure projects based on topographic data considering deploying and operating costs.
The suggested method is the three-dimensional scan of the region which includes the work under study, pointing out the best tracks for development based on the topography design, considering geometric characteristics of the project, restriction areas, deployment and operating costs.
The proposed selection method was applied in a railway variant of eight kilometers, where 729 alternatives were analyzed and then set the best track for the study of horizontal alignment.
The results were compared to the executive project and the same considerations used in the project were made which demonstrated the feasibility of the methodology.

Identiferoai:union.ndltd.org:IBICT/oai:www.teses.ufc.br:10213
Date08 December 2014
CreatorsPedro Almi da Costa Freire
ContributorsErnesto Ferreira Nobre JÃnior, Josà Leomar Fernandes JÃnior, Bruno de Athayde Prata
PublisherUniversidade Federal do CearÃ, Programa de PÃs-GraduaÃÃo em Engenharia de Transportes-PETRAN, UFC, BR
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Formatapplication/pdf
Sourcereponame:Biblioteca Digital de Teses e Dissertações da UFC, instname:Universidade Federal do Ceará, instacron:UFC
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0022 seconds