The main aim of this work is to examine fracture toughness improvement mechanisms of a
composite material containing tough interlayers modified with large thermoplastic
particles.
¶
Various vinyl-ester (VE)/ poly(acrylonitrile-butadiene-styrene) (ABS) blends were used
for the interlayer-toughening of a VE/glass fibre composite to increase delamination
resistance of the material under mode I and mode II loading. Dry ABS powder was mixed
with the liquid resin in four different weight ratios: 3.5, 7, 11 and 15 phr (parts per
hundred parts of resin) while the layer thickness was varied from 150 to 500um.
Firstly, the tensile and mode I fracture toughness properties of the VE/ABS blends were
assessed, and, by using the Raman Spectroscopy technique, a chemical reaction was
discovered which occurred during ABS/VE mixing. This reaction consisted of butadiene
dissolution from the ABS particles into the VE. Also, butadiene saturation within the VE
was achieved at a composition of around 7% ABS particle content. Both mode I and mode II
fracture toughness of the composite were significantly improved with the application of
interlayers. Mode I fracture toughness GIc was found to be a function of
interlayer thickness and ABS particle content variations, with the latter dominating
GIc after the saturation point. Mode II fracture toughness was found to be
independent of interlayer thickness and only moderately influenced by particle content.
The toughening mechanisms that were the most influential within this interlayered
material were plastic deformation and micro-cracking of the layer materials. Evidence of
both mechanisms was found using optical and scanning electron microscopy (SEM).
¶
A numerical analysis was conducted, using the experimental results from this study, to
further explain the basic toughening mechanisms and fracture behaviour in the materials.
The aim of the analysis was to examine the influence of the particles on the plastic zone
size that develops in front of the crack tip, and the interaction between the particles
and the crack tip. For this purpose FEA elastic-plastic crack propagation models were
employed. Good agreement with the experimental data was found.
| Identifer | oai:union.ndltd.org:ADTP/216736 |
| Date | January 2002 |
| Creators | Stevanovic, Dejan, dejan@mso.anu.edu.au |
| Publisher | The Australian National University. Faculty of Engineering and Information Technology |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | http://www.anu.edu.au/legal/copyright/copyrit.html), Copyright Dejan Stevanovic |
Page generated in 0.0018 seconds