Return to search

TAILORING PROPERTIES TO REPRESENT HPDC TENSILE AND FATIGUE BEHAVIOUR IN ALUMINIUM-SILICON CAST ALLOY PROTOTYPES

The work presented aims to find alternatives for the prototyping of components by sand and plaster mold manufacturing processes that deliver properties similar to high pressure die casting (HPDC). Sand and plaster test samples have been casted. The Al-7Si-0.35Mg alloy has been tested in as cast condition and in a heat treated condition; T5 for sand cast samples and T6 for those plaster cast. The Al-7Si-2Cu-0.35Mg alloy was also tested in as cast condition. Tensile, fatigue and hardness tests have been performed. Microstructural investigation comprising secondary dendrite arm spacing, defects, Fe-rich β-phases and Si size measurements has been performed on the different conditions. The results have been compared to available data for Al-9Si-3Cu-(Fe) alloy used in HPDC. The T5 heat treated sand cast condition has shown to have properties similar to HPDC. All other sand cast conditions, including the previously tested Al-9Si-3Cu-(Fe) alloy, have been shown to be reasonable alternatives.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hj-27734
Date January 2015
CreatorsRiestra Perna, Martin Ignacio
PublisherTekniska Högskolan, Högskolan i Jönköping, JTH. Forskningsmiljö Material och tillverkning – Gjutning
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.002 seconds