The aim of the work was to design and carry out a microprocessor driven temperature controller which will be operated by PC or immediately by its own control panel. The controller should serve, for example, as a regulation of temperatures in rooms, in ovens where electrical energy is used for heat production. This controller is able to measure temperature through connected temperature sensors, which means a thermistor PT1000 and a thermocouple type K, and to regulate temperature by the help of a heating body connected to the power output part of the controller.In this piece of work there is an issue of temperature measuring by the help of thermocouples and thermistors analysed, there are also mentioned the means of controlling and switching of alternating electrical tension for power operating and analysis of an issue of device connection and communication by the help of RS232 interface and USB with PC. The work also deals with a design of PSD controller with its subsequent realisation. The controller is tested on a micro-condensational siccative oven developed for the UTB research in Zlín.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:217258 |
| Date | January 2008 |
| Creators | Perůtka, Martin |
| Contributors | Fiedler, Petr, Bradáč, Zdeněk |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds