The aim of this work is to familiarize with the design of the thermal test chamber to measuring passive components. Show features and involvement of selected circuits that ensure reliable operation of the device. For the realization of the role are the most important the Peltier cells and temperature sensors. But they can not work without the control unit. The control unit provides the necessary communication with each component and also with user. For this purpose we made a selection of suitable type of microcontroller and communication equipment (matrix keypad, LCD, buttons and LEDs). Subsequently was designed the algorithm to control the thermostat suitable for using in students training. The algorithm was written in the microcontroller in form of a program. There is also implemented a PSD controller in the program, which evaluates the data collected by a sensor. Then set the correct function of Peltier cells. After the thermostat was designed and realized, test measurements were performed and the results were documented and evaluated.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:219137 |
| Date | January 2011 |
| Creators | Demjanics, Ferenc |
| Contributors | Koňas, Petr, Roubal, Zdeněk |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds