The research presented in this thesis is to evaluate the feasibility of demountable shear connectors as an alternative to welded shear connectors in composite structures through push off tests and composite beam tests. Push off tests were conducted to examine the shear strength, stiffness and ductility of demountable shear connectors in composite structures. The experimental results showed that demountable shear connectors in composite structures have very similar shear capacity to welded shear connectors. The shear capacity was compared against the prediction methods used for the welded shear connections given in Eurocode 4 and AISC 360-10 and the methods used for bolted connections in Eurocode 3 and ACI 318-08. It was found that the AISC 360-10 and ACI 318-08 methods overestimated the shear capacity in some cases. The Eurocode method is conservative and can be utilised to predict the shear capacity of demountable connectors in composite structures. The experimental studies of two identical composite beams using demountable shear connectors and welded shear connectors showed very similar moment capacity. However, the specimen with demountable shear connectors was more ductile compared to the welded specimen. The experimental study suggests that the methods available in Eurocode 4 and BS 5950 for predicting moment capacity and mid span deflection can be adopted for composite beam with demountable shear connectors. In addition, a finite element analysis of push off test and beam test with demountable shear connectors was also conducted for parametric studies and results are used to evaluate the behaviour of composite structures.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:732181 |
| Date | January 2017 |
| Creators | Rehman, Naveed Ur |
| Publisher | University of Bradford |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://hdl.handle.net/10454/14790 |
Page generated in 0.002 seconds