This project investigates methods of construction the wavelet-based QRS-complex detector. QRS-complex detection is very important, because it helps automatically calculate heart rate and in some cases it is used for compression ECG signal. The design of QRS detector can be made with many methods, in this project were mentioned and consequently tested only a few variants. The principle of designed detector used a wavelet-based decomposition of the original ECG signal to several frequency-coded bands. These bands are consequently transformed to absolute values and with the help of the threshold value are marked positions of assumed QRS complexes. Then are these assumed positions from all bands compared between themselves. If the position is confirmed at least at one nearby band, then is this position marked as true QRS complex. To increase efficiency of designed detector, two modifications were additionally mentioned. The first one, using the envelope of the signal, had rather negative effect on detectors efficiency. The second modification, using combined signal from three pseudoorthogonal leads, had reversely very good effect on detectors efficiency. In the end, the designed detector and all its modifications were tested on signals from CSE library (exactly on leads II, V2 and V6).
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:217974 |
| Date | January 2009 |
| Creators | Kocian, Ondřej |
| Contributors | Provazník, Ivo, Kozumplík, Jiří |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds