In recent years, a number of power control concepts have been studied and implementedeither in simulation or in practice for different communication systems. It is still the case that a great deal of research is being conducted within the area of energyefficient power control mechanisms for future wireless communication networksystems. However, only a limited amount of practical work has been implemented onreal test beds environment. The main goal of this thesis is to propose and develop newprototype Transmit Power Control Mechanisms (TPCM) on WARP (Wireless Open-Access Research Platform) boards for point-to-point communications, which are to bedeveloped and tested in an indoor environment. This work mainly focuses on the automaticpower control nodes, transmission and reception over-the-air. In this thesis, wehave designed and developed TPCM to adjust the power levels on a transmitter nodeby following the feedback (ACK) approach. In this case, the destination (receiver)node always sends the feedback (ACK) to transmitter node during every successfultransmission of message signal and the main focus is on a reduction in the packetloss rate (PLR), an increase in the packet reception rate (PRR) and the capacity ofthe nodes. In this real work, we have developed and measured the results based ontwo functions namely, with and without packet window function power control mechanisms. According to the measurements section, both with and without function powercontrol mechanisms proved to have better performances for different tunable parameters.If both functions are compared, then the with window function power controlmechanism was shown to produce better performances than the without windowpower control mechanism and it also converged faster than the without window function.If consideration was given to controlling a reduction in packet loss rate, thenthe with widnow function offered higher performances than those without the windowfunction. In this regard, it was found that the with window function has acheived amaximum packet reception rate than that for the without window function for differenttunable parameters. In relation to the power consumption scenario, it was determinedthat the without window fuction proved to produce energy saving performances thanthe with window function. There are several interesting aspects of the transmit powercontrol mechanisms highlighted in the results and discussion chapter.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:miun-18437 |
Date | January 2013 |
Creators | Kandukuri, Somasekhar Reddy |
Publisher | Mittuniversitetet, Institutionen för informationsteknologi och medier |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Relation | Research report in electronics |
Page generated in 0.0019 seconds