In this thesis, I present the work performed towards a proposal to couple a piezoelectric, nanomechanical beam to a radio frequency single electron transistor (RF-SET). Lumped element RF circuit theory is applied to 50 kOhm single electron transistors acting as the resistor in an RLC circuit. It is shown that for the expected inductances and stray capacitances, at an operating frequency of 1.25 GHz, the RF-SET is expected to have a usable half-bandwidth of 175-200 MHz and a charge sensitivity on
the order of 10^(−5) e/√Hz. A fabricated RF-SET device is cryogenically cooled and used to find experimental values of the stray capacitance. A heterostructure made of gallium arsenide and aluminum gallium arsenide from which piezoelectric beams can be made is designed to contain a 2-dimensional electron gas (2DEG). Quantum Hall effect samples are fabricated from the wafer, and magnetoresistance measurements for each sample are presented. It is shown that the 2DEG has a high electron concentration of about 8 × 10^11 cm−2 but a low mobility of about 3.5 × 10^4 cm^2/(V·s) for this type of heterostructure. / Thesis (Master, Physics, Engineering Physics and Astronomy) -- Queen's University, 2010-03-01 22:55:56.427
Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OKQ.1974/5445 |
Date | 02 March 2010 |
Creators | Rideout, Joshua |
Contributors | Queen's University (Kingston, Ont.). Theses (Queen's University (Kingston, Ont.)) |
Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
Language | English, English |
Detected Language | English |
Type | Thesis |
Rights | This publication is made available by the authority of the copyright owner solely for the purpose of private study and research and may not be copied or reproduced except as permitted by the copyright laws without written authority from the copyright owner. |
Relation | Canadian theses |
Page generated in 0.0023 seconds