This diploma thesis is concerned with the numerical analysis of welded aluminim structures. In these structures, there are significant decreases in the mechanical properties at the area of the weld and in the heat affected zone as a result of welding. Within this thesis, simulations of quasi-statically loaded welded joints made from EN AW-6082 T6 alloy were performed to investigate the load capacity and ductility of these joints. Computations were performed using a programme system based on an explicit finite element method. To describe material anisotrophy, a nonlinear material model called the Weak texture model was chosen. Material properties of the weld and the heat affected zone were considered to be different from base material. The required material parameters were adopted from available literature, however, material tests and indetification procedure of these parameters were described. In comparison with the experimental data, the results of the numerical simulations showed a relatively good ability of models to capture load capacity of studied welded joints. Nevertheless, due to mesh sensitivity of models caused by localization of deformation, it was not possible to determine ductility of these joints.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:372183 |
| Date | January 2018 |
| Creators | Štěrba, Martin |
| Contributors | Kala, Jiří, Hradil, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta stavební |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds