The thesis deals with the dependence of mechanical characteristics on the anisotropy of polymers Nylon 12 and Ultem 9085 made by a 3D printing technology Fused Deposition Modeling (FDM). The evaluation of the material characteristics was performed on the basis of tensile and non-instrumental impact tests. It was proven that the material characteristics are strongly dependent on anisotropy, i.e. on layer thickness and raster angle for both types of polymers.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:378389 |
| Date | January 2018 |
| Creators | Král, Filip |
| Contributors | Moravčík, Igor, Válka, Libor |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0027 seconds