Despote the indisputable advantages of fine-pitch components, is need to calculate with a few trouble during production, especially increased requirements for accuracy of mounting and solder printing. In this work I’m concerned with problems of solder printing for these components and evaluation using SPC. For the evaluation I used 3D paste inspection based on laser scanning of the surface. The output of this work is to describe the principles of solder printing and elaborating of GR&R, SPC analysis and histograms of solder printing for some outputs. I focused in my master thesis on motive design change of problematic components and economic evaluation of the adjustments.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:218992 |
| Date | January 2011 |
| Creators | Šimeček, Ondřej |
| Contributors | Polsterová, Helena, Starý, Jiří |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds