Functionally graded structures have material properties that continuously vary in one or more directions. Examples include human teeth, seashells, bamboo stems and human organs, where the varying volume fraction of fibers and their orientations optimize functionality. Deformations of such structures typically involve bending, stretching, and shearing. An everyday example of shearing deformation is the twisting of wet fabrics to extract water. In this study, we analytically examine the large deformations of functionally graded Mooney-Rivlin circular cylinders, focusing on how radial grading of material moduli can be beneficially utilized. We investigate the finite deformations caused by pressures applied to the bounding surfaces and axial loads or twisting moments on the end faces. We also simulate residual stresses in a hollow cylinder either by inverting it inside out or by closing a longitudinal wedge opening parallel to the cylinder axis through axisymmetric deformation before other loads are applied.
It is observed that the maximum shear stress in an initially stress-free Mooney-Rivlin cylinder can occur at an interior point. In the absence of axial forces on the end faces, the cylinder elongates when twisted, with the degree of elongation depending on the grading of the material moduli. These findings should aid numerical analysts in verifying their algorithms for simulating large deformations of rubber-like materials modeled by the Mooney-Rivlin relation. / Master of Science / Functionally graded materials (FGMs) are composites whose properties vary in one or more directions to exploit the functionality of the individual components. An example would be a sheet of material that is fully metallic on one side and fully ceramic on the other, with properties changing gradually through the thickness. The Mooney-Rivlin model is used to capture the stress-strain response of rubber-like materials. Therefore, functionally graded Mooney-Rivlin cylinders are rubber-like composite cylinders whose properties change throughout their thickness.
Functionally graded cylinders have a wide array of applications, including in pressure vessels, vibration damping systems and tires. Therefore, having a thorough understanding of the stresses induced in these cylinders when subjected to loads is essential for safe and reliable designs.
This research aims to investigate the effects of material inhomogeneity on the stresses induced in functionally graded cylinders subjected to torsion, radial expansion, eversion, and various combinations of these. Furthermore, realizing that stresses induced during the fabrication process cannot be easily quantified, we study a problem in which these induced stresses can be determined and analyze their effect on subsequent deformations of the cylinder when subjected to torsion and radial expansion.
To achieve this aim, we use a member of Ericksen's third family of universal deformations, which mathematically describes torsion, inflation, and eversion, along with the Mooney-Rivlin model to determine the stress state resulting from deformation.
The results show that for cylinders of the same geometry in the stress-free undeformed state subjected to identical surface tractions, material inhomogeneities greatly influence the stresses in the cylinder. It was also found that the magnitude of the normal and shear stresses, axial stretch, and the geometry of the cylinder after deformation depend on the type of deformation and functional grading. Additionally, the results indicate that the normal stresses induced in an initially stressed cylinder are much greater than those in a cylinder that is initially stress-free when subjected to the same boundary conditions.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/119407 |
| Date | 08 May 2024 |
| Creators | Fairclough, Kesna Asharnie |
| Contributors | Biomedical Engineering and Mechanics, Batra, Romesh C., Wayne, Jennifer S., Seidel, Gary D. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Thesis, Text |
| Format | ETD, application/pdf, application/pdf |
| Rights | CC0 1.0 Universal, http://creativecommons.org/publicdomain/zero/1.0/ |
Page generated in 0.0021 seconds