There are many causes of structural failure. One of the most important factors leading to
material failure is residual stress. This stress represents effects left in structures after
processing or removal of external loads including changes in shape and crystallite size. In
aggregate, residual stress changes the mechanical behaviour of materials. Various
measurement techniques encompassing destructive, semi destructive, and non-destructive
testing can be used to measure residual stresses.
Thin plates are common in engineering applications. This thesis analyzes residual stresses on
circular AISI 1020 steel alloy plates after removal of external loads using two-dimensional
X-ray diffraction. Two identical thin circular plates are used in this experiment; one of which
is statically loaded. The other plate is used as a control specimen. Residual stresses in the
plates are measured using two-dimensional X-ray diffraction and the measurements are
compared to those obtained using finite element analysis. It was found that experimentally
measured residual stress occurred due to manufacture processing. Also, modules A and B
showed the external effect of applying not enough to reach the plastic region to deform
specimen 2 and obtain residual stress results distribution.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OWTU.10012/7562 |
| Date | January 2013 |
| Creators | Alusail, Mohammed |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Thesis or Dissertation |
Page generated in 0.0021 seconds