Return to search

The effects of part orientation and fluid flow on heat transfer around a cylinder.

The effects of quenchant flow around a 4140 steel cylinder have been experimentally investigated. An apparatus was developed to repeatably immerse a two inch diameter by eight inch long probe into an agitated quench tank. The probes were normalized prior to quench to relieve any residual stresses. Distortion, residual stress and hardness were experimentally measured. The results verified that there was a variation of cooling rate in respect to quenchant flow around the cylinder. The data showed that there was a higher cooling rate nearest to the quenchant flow versus a much lower cooling rate away from the flow. Computational fluid dynamics are also presented to give insight into the behavior of the quenchant flow in the tank and around the cylinder.

Identiferoai:union.ndltd.org:wpi.edu/oai:digitalcommons.wpi.edu:etd-theses-1816
Date12 May 2004
CreatorsRondeau, Darrell K
ContributorsRichard D. Sisson, Jr., Advisor, Yiming (Kevin) Rong, Committee Member, Md. Maniruzzaman, Committee Member
PublisherDigital WPI
Source SetsWorcester Polytechnic Institute
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceMasters Theses (All Theses, All Years)

Page generated in 0.0016 seconds