Current requirements in mechanical engineering require more accurate operations and more efficient technologies. The aim of this thesis is the analysis of the leveling of square rods. The main problem is the setting of the leveling machine for the specified material and geometric data so that the initially curved material, which passes through alternatively positioned offset rollers, is leveled as much as possible. The main factor in the leveling process is the plastification of the material used for the redistribution of the residual stress. Based on existing theo-retical knowledge in this field, programs are set up to simulate the passing of the rod through the leveling machine. Further, modifications leading to the improvement of the whole process are presented. Finally, there is a verification of the results which is made independently of the submitted solution and processed by the finite element method.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230223 |
| Date | January 2012 |
| Creators | Šebek, František |
| Contributors | Návrat, Tomáš, Petruška, Jindřich |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0022 seconds