The aim of this master’s thesis is to develop measuring methods for evaluation of the lubrication regime in a rolling bearing. The first part of thesis maps several measuring methods according to which the lubrication mode can be evaluated. Based on the assessment of this part, electrical monitoring methods were selected. For application of these methods was constructed testing device with rolling bearing. Specific measuring chains based on selected methods were designed and verified by using initial tests on a ball-on-disk tribometer. According to the results of these initial measurements was selected and applied suitable measuring chain to the selected test device. In the end, there was a successful measuring the lubrication parameter on the rolling bearing. Additionally, other tests dealing with the influence of temperature and type of oil on the measurement itself were performed.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:417738 |
| Date | January 2020 |
| Creators | Valenta, Jakub |
| Contributors | Čermák, Jan, Šperka, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0024 seconds