Return to search

Estudo comparativo da densidade radiográfica de diferentes cimentos odontológicos restauradores à base de ionômero de vidro. / Comparative Study of different density radiographic restorative dentistry cement- based glass ionomer.

Made available in DSpace on 2014-07-29T15:21:57Z (GMT). No. of bitstreams: 1
Dissertacao - Aureo Honorato e Melo.pdf: 333429 bytes, checksum: 7ff45b837da001c1e75ec7d4524dae41 (MD5)
Previous issue date: 2007-10-05 / Glass ionomer cements are generally represented by a combination of a powder, which main components are alumina (Al2O3 ), silica (Si2O3 ) and calcium fluoride (CaF2 ), and a liquid, which is an aqueous solution basically compound of polyacrilic acid and tartaric acid. Its excellent features have
been described since the 1960 s, and some of these are the radiopacity and fluoride release. The aim of this work is to study the radiopacity measured by radiographic exposures of the following restorative glass ionomers: Vidrion R (SS White Manufacturing Ltd, Gloucester, England); Chemfil (DENTSPLY DeTrey, Konstanz, Germany); Vitro Molar (DFL); Maxxion R (FGM Dental products Ltd); Riva self cure powder and liquid and Riva self cure in capsules (Riva SC, SDI Ltd, Bayswater, Australia) and to make comparisons among them. Then, different radiographic densities from an aluminum scale were attained and they could be compared and used in the clinical work. The specimens were made using standard glass plates (25,4 x 76,2 x 1,0 mm) manufactured by Global Trade Technology and they were perforated by a 5mm bur (number 5, Black & Decker, Brazil) especially used for glass. For the radiopacity evaluation, the samples were radiographed using three different types of films, which are the following: Kodak Dental Intraoral ESpeed Film (EASTMAN KODAK Co., Rochester, N.Y.); Contrast DFL DV-58 (DFL Ltd); and Agfa Dentus M2 Confort (Heraeus Kulzer Inc.). A 99,5% pure
aluminum step wedge and a Gnatus XR 6010 X-ray equipment were utilized in this work. The data were collected by 5 examiners, who were properly calibrated, and analyzed by Friedman and Kolmogorov-Smirnov tests. The results showed no statistical differences among the averages of each examiner comparing the cements and the films. And the results also showed that all the cements present radiographic density average values below 1. / Os propósitos deste trabalho foram estudar a radiopacidade de cimentos de ionômero de vidro restauradores a partir de tomadas radiográficas e comparálas entre si. Para a consecução, obtiveram-se a partir de uma escala de
alumínio, densidades radiográficas comparáveis e possíveis de serem utilizadas no trabalho clínico. Corpos-de-prova cilíndricos foram obtidos utilizando-se lâminas de vidro de 25,4 x 76,2 x 1,0 mm perfuradas por uma broca número 5 com 5,0 mm de diâmetro. As radiografias dos corpos-deprova foram obtidas em três marcas de filmes. Foi utilizado neste experimento uma escala de alumínio padronizada denominada penetrômetro e um aparelho de raios-X Gnatus XR 6010. Os dados foram coletados por cinco examinadores devidamente calibrados e analisados pelos testes de Friedman e de Kolmogorov-Smirnov. Os resultados obtidos mostraram que existiu diferença estatisticamente significante nas médias conseguidas por cada examinador nos grupos formados pelos cimentos e pelos filmes. Também mostrou que todos os cimentos apresentaram valores médios de densidade
radiográfica menor que 1.

Identiferoai:union.ndltd.org:IBICT/oai:repositorio.bc.ufg.br:tde/1366
Date05 October 2007
CreatorsMELO, áureo Honorato e
ContributorsFREITA, Gersinei Carlos de, SOUZA, João Batista de
PublisherUniversidade Federal de Goiás, Mestrado em Odontologia, UFG, BR, Ciência da Saúde
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Formatapplication/pdf
Sourcereponame:Biblioteca Digital de Teses e Dissertações da UFG, instname:Universidade Federal de Goiás, instacron:UFG
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0026 seconds