This research demonstrates that a 3D printed bolus can be customized for electron
radiation therapy. Both extruder and powder based printers were used, along with, paraffin
wax, super stuff, and H20. The plan dose coverage and conformity for the planning target
volume (PTV), was such that the distal side of the PTV was covered by the 90% isodose
line. The structure is read, and converted into an STL file. The file is sent to a slicer to
print. The object was filled with parafin wax, superstuff or water and sealed. Materials
Hounsfield units were analyzed, along with the structure stability. This method is evaluated
by scanning the 3D printed bolus. The dose conformity is improved compared to that with
no bolus. By generating a patient specific 3D printed bolus there is an in improvement in
conformity of the prescription isodose surface while sparing immediately adjacent normal
tissues. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2017. / FAU Electronic Theses and Dissertations Collection
| Identifer | oai:union.ndltd.org:fau.edu/oai:fau.digital.flvc.org:fau_39757 |
| Contributors | Gibbard, Grant (author), Kalantzis, Georgios (Thesis advisor), Florida Atlantic University (Degree grantor), Charles E. Schmidt College of Science, Department of Physics |
| Publisher | Florida Atlantic University |
| Source Sets | Florida Atlantic University |
| Language | English |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation, Text |
| Format | 62 p., application/pdf |
| Rights | Copyright © is held by the author, with permission granted to Florida Atlantic University to digitize, archive and distribute this item for non-profit research and educational purposes. Any reuse of this item in excess of fair use or other copyright exemptions requires permission of the copyright holder., http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.002 seconds